Category: Clasps (CL)

There are different types of clasps, and each clasp has a specific function and use. Clasps usually used for necklaces, bracelets, and keepsakes include spring clips, lobster clasps, toggle clasps, double-sided hooks, bar clasps, and magnetic clasps.

To make a jewelry clasp, you must first decide which type of clasp that you will use in your project. Different kinds of clasps can be made, such as the spring clip and lobster claw clasp.

How to Make Jewelry Clasps Out of a Baby Pin

Jewelry clasps are devices used to secure a necklace, bracelet, or watch to the wearer’s personality.

For bracelets and necklaces, there are traditional hooks or hidden magnets invented in Ancient Egypt. Other forms include buttons (the golden age of Hollywood), snap-shut clasps, and magnetic clasps. There are many ways to attach a clasp, but attaching clips differs depending on the jewelry design.

For example, in designing necklaces with links or chains as opposed to bezel-set gems or other forms, it is essential that the hook or magnet be strong enough to hold even heavyweight and that the clasp rests comfortably on the neck. Likewise, in designing bracelets, it is necessary to coordinate the clasp with the piece’s overall design, especially when using single-strand methods. In this article, I will describe how to make a clasp out of baby safety pins.

Step 1: Gather Materials

• 2 Baby safety pins
• 7 inches of rope or ribbon
• A good pair of scissors

Step 2: Prepare the safety pins.

Remove any excess glue and bend them in the shape shown in the photo below. The last bend should be at about a 90-degree angle. It would be best to use your thumb to make sure that it is bent as far back as possible without bending it too much.

Step 3: Repeat steps 1 & 2 for the other safety pin

To make an in-line toggle clasp, you must have two safety pins. This is because the idea of an in-line toggle is that one safety pin can rotate around the other without getting tangled or stuck. If only one safety pin is used, it will not turn as freely, so it will not function as a toggle clasp.

Step 4: Attach the safety pins.

With your pliers, attach both the safety pins together with the rope or ribbon in between them. The process for connecting two safety pins is very delicate since you don’t want to break either of them. In addition, you have to make sure that both safety pins are bent in the same direction so they can rotate freely around each other.

Step 5: Attach the clasp to your piece

You can now connect your clasp to a necklace after attaching the safety pins with your rope or ribbon. You can do it by weaving it through all of the links on your chain. If you connect it to a bracelet, find the end that fits perfectly into one of your bracelet links and attach the clasp there.

You have now successfully created a toggle clasp out of baby safety pins! Here’s another example of a toggle clasp made with rope and a baby safety pin.

You can even combine the in-line toggle clasp with other clasps like magnetic clasps or traditional hooks.

Step 6: Enjoy!

Now that you know how to make an in-line toggle clasp out of baby safety pins, why not try it out? I’d love to see pictures of the jewelry pieces that you make using this clasp.

It’s Simple and Easy!

This clasp is perfect for people looking to make a nice piece of jewelry with a limited budget. In addition, it is simple enough that kids can help out in making them as well!

So, remember—the next time you have an idea for your next piece of jewelry, consider using this toggle clasp! It can make all the difference in your work!

Wire clasps are great for making your necklace or bracelet because they’re simple, easy to make, and affordable. All you need is a wire and a hold of your choice. You can even use an old broken earring as the clasp!

Wire clasps are great for making your necklace or bracelet because they’re simple, easy to make, and affordable. All you need is a wire and a hold of your choice. You can even use an old broken earring as the clasp!

Simple Tips to Make Wire Clasps for Jewelry

Wire clasps are very versatile in that you can use them with any material. For example, this technique will work well for you if you have fabric that needs closure but doesn’t have buttonholes or zippers. You could also use wire clasps to secure an elastic waistband on a skirt or pants; all you need is some sturdy wire and two end caps (like those found at the hardware store). The possibilities are endless when it comes to jewelry and clothing closures, so try this technique out!

To make a wire clasp you’ll need the following:

• wire
• pliers- preferably jewelry pliers (they’re more nuanced, so they’re easier to work with)
• a clasp of your choice. It can be as simple as an old earring that broke or as complex as something you found in the craft store. Choose what appeals to you!

Step 1:

Using the pliers, find the end of your wire. Bend it around itself to form a loop.

Step 2:

Bend your wire so that it is perpendicular to its original position and coming up into the center of your original loop. This will be the piece that attaches to your fabric or jewelry chain. Make sure you leave yourself enough space for your circle and chain.

Step 3:

Wrap the wire around itself so that it forms a smooth line, just as if you were creating a bangle bracelet from jewelry wire. Make sure to make the end perpendicular to your wrap point to keep the shape sturdy.

Step 4:

Lastly, use your pliers (preferably jewelry pliers) to straighten out your wire and make it friendly and even.

Step 5:

Using the wire clasps is just as easy- you’ve already done all of the hard work! Just attach your clasp, chain, or elastic, and you’re set! Some trial and error go along with working with wire; I can’t tell you how to make the perfect clasp because it will be unique to your materials and taste.

Step 6:

As you can see, this is an example of a wire clasp that’s made from jewelry wire. The earring used as the clasp has been broken for quite some time now- maybe five years? I like to wear this clasp with long necklaces so that I can see the earring part. It adds a nice touch!

When you know how to make wire jewelry, you’ll be able to create your unique pieces of art. Practice makes perfect, though; for example, don’t give up if you mess up getting the loop or wrap right. It can take a few tries to get it right, but you’ll figure it out!

Conclusion

When you know how to make wire jewelry, you can make many styles of pieces. Making your jewelry with simple tools is a great way to learn about the materials and their characteristics and learn different techniques in the craft.

A clasp is a device used for fastening two ends of fabric or similar material together, usually consisting of two parts: one which connects to the end with a loop or ring (called the catch), and one which connects to the other end. The term “clasp” can also refer to a closing mechanism on clothing; this usage typically refers to buckles, buttons, or zip fasteners.

In jewelry-making, clasps are often focal points for design made from precious metals such as gold and silver. We call the clasps that connect with hooks jump rings; those that connect with loops are split rings.

Classifications of Clasps

Clasps come in many different shapes and sizes, but they all have the same function: to fasten two ends of the cord together.

Most clasps have a catch that we can use to the end of the cord; and an attachment that connects to the other end.

The catch can be simple, or it could look like a decorative part of the clasp itself for added appeal. Clasp catches are usually made in pairs or sets, one for each end of the cord.

How to Attach a Jewelry clasp to a cord

• After you’ve fitted the clasp onto the cord, take the ends of the cord. You can wrap them around each other in a figure-eight shape.
• Pull slowly but firmly so that the wraps are tight enough to secure the clasp without compressing it too much. Pull the ends of the cord down through the nearest loop on the clasp.
• Pull about an inch or so (depending upon your preference) of cord through and then pull it tightly, sealing off the knot.
• Select a simple overhand knot for attaching more oversized clasps to your cords. Make sure that you wrap each end underneath once before bringing them together to tie.
• Tighten by pulling on each end of the cord in opposite directions to cinch up your selection.

Other Methods

If you need something sturdier than a simple overhand knot, you can also use a lark’s head beadwork knot. To start this process, pass one end of your cord through the hole in your clasp and make two wraps around your other piece, as shown above.

Then bring the cord up through the hole in your clasp and pull snugly. Place a small drop of glue inside the loop to keep it secure. Now make an overhand loop using the other end of your cord, which should have its closure knot on it already.

Make sure that neither cord slips as you tie a simple overhand knot around them both. If any excess length remains after tightening the knot, you can trim this off by cutting it into one of your initial wraps with a pair of scissors or fingernail clippers.

Conclusion

As we can see, there are several different options for attaching clasps to the cord. Depending on your preference, time, and budget, you may want one option over another. However, keep in mind that the best option is to consult with an expert for your specific needs. This will help assure that your clasp can be attached safely and effectively.

A good jewelry maker or leatherworker should be able to easily attach a clasp to a cord for you, thus taking away the burden of trying to figure it out on your own. Good luck with your project!